Latest news for PULS UK 
Companies are urged by PULS UK to check their redundant power systems(20/01/2012)
Power supply manufacturer PULS UK believes that many supposedly fail-safe systems are not as secure as operators think, and urges companies to look closely at the redundancy back-up systems providing emergency power to mission-critical production equipment. Common problems affecting redundancy systems include batteries in DC UPS and AC UPS units not functioning correctly - either because their useful life has expired or they are working outsi... [more]
Technical data and ePLAN P8 macros for PULS UK's Dimension and MiniLine ranges now available on the ePLAN Data Portal(19/05/2011)
The ePLAN P8 software, developed by the Friedhelm Loh Group offers unlimited options for project planning, documentation and administration of automation projects. With around 60% of the market ePlan is the leading player in this sector. Technical data and ePLAN P8 macros for PULS UK's Dimension and MiniLine ranges are now available on the ePLAN Data Portal. The portal provides access to high-end CAE/CAD software used by designers in the field... [more]
PULS UK's range of redundancy modules secures ATEX approval(18/04/2011)
An explosive atmosphere is created when dust, mist or gases become mixed with the air and produce a flammable substance. Many industrial environments may contain, or have the potential to produce, an explosive atmosphere. Examples include places where production activities create or release flammable gases or vapour, such as paint spraying, or in factories handling fine organic dusts such as grain flour or wood. ATEX, which derives its name... [more]
PULS UK's non-isolated step down DC DC converter converts input voltages to pre-settable output voltages(21/03/2011)
At present, linear regulators are commonly used to reduce DC supply voltages, but these operate by bleeding off excess power as heat and therefore waste a considerable amount of energy. The technology used in the PULS YD25.241 delivers much greater levels of efficiency and also dramatically reduces the heat generated within the host device. PULS UK's YD 25.241 is a non-isolated step down DC/DC converter that has the ability to convert input vo... [more]
PULS UK launches new MiniLine 60W low-temperature power supplies with overall operating range of 100 degrees(28/09/2010)
PULS UK has announced the launch of two new MiniLine 60W units which are available in both standard and low temperature versions. As with other PULS power supplies the ML60s have been tested at temperatures of up to +60°C but what makes the new low- temperature model outstanding is its ability to start and deliver full power from a chilly -40°C giving an overall operating range of 100 °C. PULS says that although there are several manufacturer... [more]
PULS UK awarded LEED Gold certificate for the energy saving credentials of its new factory in China(11/08/2010)
LEED (Leadership in Energy & Environmental Design) certification provides independent, third-party verification that a building project meets the highest green building and performance standards. PULS has been awarded a LEED Gold certificate in recognition of the energy saving credentials of its new factory in China. The company was also awarded 50,000 Euros by the Suzhou Industrial Park Authority where the factory is located for the energy s... [more]
PULS UK partners with Neutrino Technology to offer a bespoke power system development service(21/06/2010)
PULS UK has teamed up with consultants Neutrino Technology to offer a bespoke power system development service for customers with requirements that cannot be met using off-the-shelf units alone. The Ipswich-based company has extensive knowledge of the PULS range and is ideally placed to offer advice or build bespoke systems utilising PULS power supplies and approved ancillary equipment. The new service is likely to be of interest to custome... [more]
QS40 power supply brings the benefits of compact size and high efficiency to the single-phase market(11/05/2010)
PULS UK has announced the launch of its latest Q-series single-phase unit, the 1 Kw QS40. As with other PULS devices the new 40Amp unit is remarkably compact measuring only 125 x 124 x 127 mm and weighing in at a featherweight 1.5 kg making it one of the smallest and lightest units on the market. The QS40’s diminutive size allows multiple units to be used in parallel to suit applications requiring additional power, while efficiency of over 9... [more]
Other electrical systems and equipment news
Electrical products and systems:
Cables and cabling -
Circuit protection and electrical distribution -
Lighting and lamps -
Power generation -
Machine and motor control -
Wiring devices -
Electrical installation -
Electrical industry -
Company news -
Product news
Market sectors:
Heating, ventilation, air conditioning, refrigeration -
Home and residential -
Offices and commercial -
Industrial -
Power and utilities -
Security, fire and safety
